profiles
Drag to rotate
Stainless Cove
- T316 marine-grade stainless, 28 gauge (0.015")
- Cove profile, 0.450" W × 0.182" H, in 144" lengths
- Mill finish; brushed, polished and patinas applied by your fabricator
Drag to rotate
Brass Cove
- C26000-H02 brass (70/30, half-hard), 26 gauge (0.016")
- Cove profile, 0.450" W × 0.182" H, in 144" lengths
- Mill finish; brushed, polished and patinas applied by your fabricator
Drag to rotate
Aluminum Bevel
- 6061-T6 aluminum extrusion
- Bevel profile, 0.440" W × 0.178" H, in 144" lengths
- Mill finish; brushed, polished and patinas applied by your fabricator
Material thickness
Up to 5/16" thick, the material is simply square cut. Anything thicker keeps a 1/4" square face at the corner and is back-beveled at 45° below it to accept the LUSTRO® tool and fasteners.
Square cutNo bevel needed
Back bevel1/4″ at 45°
Back bevel1/2″ at 45°
Back bevel1″ at 45°
StoneLUSTRO® profile45° back bevel
Specifying LUSTRO®?
Find a LUSTRO® Fabricator